top of page

Non Follow Up Joystick
2-Position Return Momentary Joystick


Model: PE6200-HOK

Type: 2-position momentary

Contact: 2NO

Electrical Life: 1 million times

Mechanical Life: 1 million times
Mounting Hole Diameter: 30mm

Size: 15*4.8cm/5.91*1.89in

Weight: 202g(approx.)


· The joystick switch is a momentary switch that has 2 normally open contacts. This sends a 24V DC output signal to move the rudder Port and Starboard.

· The stick will return to its original position once released and the

rudder will remain in that position until the operator operates the joystick again or if the operator uses another steering mode.

· Rubber sleeve cover on stick is resistant to water, oil and dust.

Often referred to as ‘Bang Bang’ Steering

bottom of page