A wide range of Hydraulic Components are available:
Hydraulic Helm Pumps (including the Triton and Tetra series), Electro Hydraulic Power Packs, Hydraulic Actuators (also referred to as Hydraulic Rams & Hydraulic Cylinders), Marine Steering Wheels (Stainless Steel Wheels, Polyurethane Wheels and Wooden Wheels available), Rudders can be made to customers drawings and Rudder Carriers can be supplied. A full range of Steering Controls are available with Full Follow Up Steering or Non Follow Up Steering options.
Full Catalogue.pdf
Online Store (UK)
New Wheel Range
Wills Ridley Ltd a été formé en 1963 pour fabriquer et commercialiser des appareils à gouverner pour des petites embarcations. La société a développé une réputation pour un service davant et daprès vente de première classe. Au fil du temps la gamme des produits sest étendue en même temps que la qualité et la performance.
Les Systèmes dAppareils à Gouverner Wills Ridley sont conçus à laide de composants standards ou faits sur mesure, qui sont fabriqués selon la plus haute qualité. Ils comprennent tous les types de commandes - électriques ou hydrauliques manuelles incorporées dans des socles ou des panneaux de consoles conçus selon la spécification.
Wills Ridley a équipé des bateaux de tous types et de toutes envergures depuis plus de 50 ans. Aujourdhui, la qualité et la fiabilité du produit sont reconnues mondialement et sont appuyées par la Certification de lAssurance de la Qualité de Fabrication ISO 9001.
Le Service Après Vente et le Support au Produit reçoivent la plus haute priorité afin d'assurer une satisfaction totale au client.
Limage à droite affiche des bateaux récents équipés de nos systèmes Electro-Hydrauliques.
Prière de ne pas hésiter de nous contacter pour un devis gratuit et sans obligation aucune.
Chile
Brazil
Austrailia
New Zealand
Algeria
Egypt
Croatia
Greece
Netherlands
Portugal
Finland
Turkey
Ireland
Germany
Romania
Sri Lanka
Middle East (Dubai)
Bangladesh
China
India
Below each Wheel are the Available sizes in Centimetres
Type 1 30-37-42-49-52-60-65-70-80
Type 2 30-37-42-49-52-60-65-70-80-90-100-120-150
Type 3 42-49-52-60-65-70-80
Type 4 32-35-37-40-45
Type 4 BIS 32-35-37-40
Type 8AM 40-45-50-60-70-80-90-100
Type 4C 35-40-45
Type 5 42-50-60-70-80-90-100-120
Type 5B 42-50-60-70-80-90-100-120
Type 6l 40-45-50
Type 12 35cms
Type 9 45-55-70-80
Type 11 50-60-70-80
Type 12 BIS 35cms
Type 8AT 40-45-50-60-70-80-90-100
Please contact our sales team for a price on any of the wheels listed. Please take a note of the type number of the wheel and what sizes are available.
Type 14L 35cms
Type 13 100-120-130-150-160-180-200
Type 14B 35cms
Type 14MET 35cms
Type 14S 35cms
Type 14W 35cms
Folding Handle for Stainless Steel Wheel
Folding Handle for Wooden Wheel
Signapore
Vietnam
Email: info_wills-ridley.com
Wills Ridley Ltd was formed in 1963 to manufacture and market steering gear for small boats. The company has developed a name for first class before and after sales service. As time has progressed, the range of products has expanded together with improved quality and performance.
Wills Ridley Steering Systems are designed from standard or tailored components, which are manufactured to the highest quality. They include all types of controls - electric or manual hydraulic built in to pedestals or purpose designed console panels to suit the specification.
Wills Ridley have supplied Various types of vessels for almost 50 years. Today, the quality and reliability of the product is recognised worldwide and is supported by ISO 9001 Design and Manufacturing Quality Assurance Certification.
After Sales Service and Product Support is given the utmost priority to ensure total customer satisfaction.
The pictures on the right display recent vessels fitted with our Electro-Hydraulic systems.
SCU SALES DOCUMENT.pdf
ESS SYS INFO.pdf
Numbered Systems Combined PDF.pdf
Fault Finding.pdf
The prices quoted for Type Approved Systems has to be related to the vessel type, total quantity and build frequency.
Type Approval is not transferable to other Classification Societies or other vessels.
Type approval of other items such as Auto Pilots etc, are available because they are readily repeatable items that are not regarded by the Classification Societies as ESSENTIAL systems.
Wills Ridley has found that small quantity builds are best put through the normal plan approval system, as the type approval is normally a longer process with higher charges.
When Type Approval of the system has been granted, the charges relate to the actual plan approval.
Extra charges will be made relating to the inspection of materials and witnessing of tests for each batch of systems built.
This means if only one set it built, the costs of these extras will be applied to one set. If 10 sets are built at the same time and these can be inspected as one batch, then the costs can be spread over the 10 sets.
Wills Ridley has general approval on some specific items which include some of the Steering components. However, there are always items that have to be tailored for the steering.
These include; Tillers to suit the Rudder Stock/s, Electro-Hydraulic Power Packs & Control systems.
Each Classification Society has varying views of type approval of steering systems. In general the following is true:
Steering systems can only be Type Approved for a specific group of vessels that remain exactly the same in all aspects relating to the steering and related components.
The related components include the rudders and the required torque.
The power supplies and control systems.
Seal Kit SK1130 (Tetra 25-35-45)
This seals kit is to be used for the following: Tetra 25-37-45 Helm Pumps
£60
Seal Kit SK1140 (Tetra 80)
This seals kit is to be used for the following: Tetra 80 Helm Pumps
Seal Kit SK1150 (S5-SB5)
This seals kit is to be used for the following: Tetra S5 & SB5 Helm Pumps
£144
Seal Kit SK1155 (S10-SB10)
This seals kit is to be used for the following: Tetra S10 & SB10 Helm Pumps
Seal Kit SK1159 (W1-1.1\8)
This seals kit is to be used for the following: W1-1.1\8 Actuator
£102
Seal Kit SK1160 (W1-1.1\2)
This seals kit is to be used for the following: W1-1.1\2 Actuator
Seal Kit SK1170 (W1-1.11\16)
This seals kit is to be used for the following: W1-1.11\16 Actuator
Seal Kit SK1175 (W1-1.3\4)
This seals kit is to be used for the following: W1-1.3\4 Actuator
Seal Kit SK1180 (W1-1.7\8)
This seals kit is to be used for the following: W1-1.7\8 Actuator
Seal Kit SK1185 (W2-2.1\8)
This seals kit is to be used for the following: W2-2.1\8 Actuator
Seal Kit SK1186 (W2-2.1\4)
This seals kit is to be used for the following: W2-2.1\4 Actuator
Seal Kit SK1190 (W2-2.3\8)
This seals kit is to be used for the following: W2-2.3\8 Actuator
Seal Kit SK1199 (W2-2.1\2)
This seals kit is to be used for the following: W2-2.1\2 Actuator
Seal Kit SK1200 (W2-2.7\8)
This seals kit is to be used for the following: W2-2.7\8 Actuator
Seal Kit SK1240 (R2.1\2)
This seals kit is to be used for the following: R2.1\2 Actuator
Seal Kit SK1250 (R3.1\4)
This seals kit is to be used for the following: R3.1\4 Actuator
Seal Kit SK1260 (R4)
This seals kit is to be used for the following: R4 Actuator
Seal Kit SK1270 (R5 pre 1992)
This seals kit is to be used for the following: R5 Actuator that was ordered prior to 1992
£132
Seal Kit SK1270 (R5 post 1992)
This seals kit is to be used for the following: R5 Actuator that was ordered after 1992
Seal Kit SK1275 (R5 pre 2007)
This seals kit is to be used for the following: R5 Actuator that was ordered between 2002-2007
Seal Kit SK1275 (R5 Post 2007)
This seals kit is to be used for the following: R5 Actuator that was ordered After 2007
Seal Kit SK1280 (R42.1\4-21 SCH)
This seals kit is to be used for the following: R42.1\4-21 Schilling Actuator
Seal Kit SK1285 (R5-75-540 Fixed)
This seals kit is to be used for the following: R5-75-540 Fixed Actuator
Seal Kit SK1290 (R5-75-775 SCH)
This seals kit is to be used for the following: R5-75-775 Schilling Actuator
Seal Kit SK1295 (R5-11.1\2 FIXED)
This seals kit is to be used for the following: R5-75-775 Fixed Actuator
Seal Kit SK2000 (KS75-125-175 MK1)
This seals kit is to be used for the following: KS75-125-175 MK1(pre 1995) Actuator. If you are unsure what MK your actuator is please contact the sales team to help
£114
Seal Kit SK2005 (KS75-125-175 MK2)
This seals kit is to be used for the following: KS75-125-175 MK2 Actuator (Ordered after 1995). If you are unsure what MK your actuator is please contact the sales team to help
Seal Kit SK2006 (KS75-125-175 MK2.2)
This seals kit is to be used for the following: KS75-125-175 MK2 Actuator (Ordered after Nov 2006). If you are unsure what MK your actuator is please contact the sales team to help
Seal Kit SK2100 (KS25-275-325 MK1)
This seals kit is to be used for the following: KS25-275-325 MK1 Actuator. If you are unsure what MK your actuator is please contact the sales team to help
Seal Kit SK2105 (KS25-275-325 MK2)
This seals kit is to be used for the following: KS25-275-325 MK2 Actuator. If you are unsure what MK your actuator is please contact the sales team to help
Seal Kit SK2120 (KS450-550-650 MK1)
This seals kit is to be used for the following: KS450-550-650 MK1 (Before Nov 2005) Actuator. If you are unsure what MK your actuator is please contact the sales team to help
Seal Kit SK2120C (KS450-550-650 MK2)
This seals kit is to be used for the following: KS450-550-650 MK2 (After Nov 2005) Actuator. If you are unsure what MK your actuator is please contact the sales team to help
*All Prices above include VAT
If you require seals for any items not listed including the J series Actuator and Servi Seals please contact our sales team.
CHECKOUT
*Pictures above are examples only and seals kits may vary for different components
Un large éventail de Composants Hydrauliques est disponible:
Pompes Hydrauliques de Barre (y compris les séries Triton et Tetra), Blocs dAlimentation Electro Hydrauliques, Déclencheurs Hydrauliques (également désignés sous lappellation Vérins Hydrauliques & Cylindres Hydrauliques), Volants Marins de Gouvernail (Volants en Acier Inoxydables, Volants en Polyurethane et Volants en Bois sont disponibles), Les Gouvernails peuvent-être fabriqués selon les plans des clients et les Porte Gouvernails peuvent être également fournis. Une gamme complète de commandes de gouvernails est disponibles avec les options d'asservissement complet (Full Follow Up) ou de non asservissement (Non Follow Up).
Meiltä löydät myös laajan valikoiman hydraulisia komponentteja:
Hydrauliset ohjaus pumput (esim. Triton- ja Tetra-sarja), sähköhydrauliset koneikot, hydrauliset toimilaitteet , ruoripyörät (materiaaleina ruostumaton teräs, polyuretaani ja puu). Peräsimet voidaan valmistaa asiakkaiden piirustusten mukaisesti. Myös peräsimen kannattimet kuuluvat valikoimaamme.
Wills Ridley Ltd perustettiin vuonna 1963 valmistamaan ja myymään peräsinohjausjärjestelmiä pienille veneille. Yritys on tullut tunnetuksi ensiluokkaisista asennus- ja huoltopalveluistaan. Aikojen saatossa tuotevalikoima, samoin kuin laatu ja tehokkuus ovat parantuneet entisestään.
Wills Ridleyn peräsinohjausjärjestelmät on suunniteltu standardi- ja räätälöityjä komponentteja käyttäen, ja ne on valmistettu korkeiden laatuvaatimusten mukaisesti. Laitteisiin on saatavilla kaikenlaisia ohjaimia - sähköisiä tai manuaalisia, jalustalle rakennettuja, konsolipaneelilla - asiakkaiden vaatimuksia noudattaen.
Wills Ridley on toimittanut tuotteitaan kaikenkokoisiin ja tyyppisiin aluksiin lähes 50 vuoden ajan. Nykyään tuotteiden laatu ja luotettavuus on maailmanlaajuisesti tunnettu. Tuotteillemme on myönnetty ISO 9001 suunnittelun ja valmistuksen laadunvarmistussertifikaatti.
Oikealla näkyvissä kuvissa esitellään aluksia, joihin on äskettäin toimitettu sähköhydraulisia järjestelmiämme.
Otattehan meihin yhteyttä, niin lähetämme teille ilmaisen tarjouksen sitoumuksetta.
Ystävällisin Terveisin
ATP-trading Oy
Petri Kuusisto
puh.+358 9 325 00 55
fax.+358 9 325 08 83
GSM +358 400 957 032
e-mail petri.kuusisto_atp-trading.fi
www.atp-trading.fi
Uma gama alargada de Componentes Hidráulicos está disponível:
Bombas Hidráulicas de Timão (incluindo as séries Triton e Tetra), Unidades de Alimentação Electro Hidráulicas, Actuadores Hidráulicos (também referidos como Cilindros Hidráulicos e Macacos Hidráulicos), Rodas de Leme Marítimas (disponíveis em Aço Inoxidável, Poliuretano e Madeira), Lemes que são produzidos segundo desenho do cliente e também podem ser fornecidas as Madres do Leme. Uma gama completa de acessórios de governo para Sistemas Follow-Up e Sistemas Não Follow-Up.
